7 Little Changes in Tyres That'll Make a Big Difference in Your Performance

Degrading vehicle performance is a concern for most car and motorcycle owners. There’s also a misconception that improving performance can be costly and time-consuming.

But the good news here is that it's none of the above. There are many quick, easy and affordable ways to improve your vehicle’s performance, comfort and longevity.

We have listed small changes you can make to your tyres to enhance performance in this article significantly.

Quick, Easy Changes In Tyres To Skyrocket Performance

#1. It All Starts With Choosing The Right Tyre

Whether we are talking about two-wheeler tyres or car tyres, choosing the right tyre is essential. The right set of tyres will boost performance, whereas the wrong set can degrade it and reduce safety.

Now. All tyres have their quality ratings as follows:

1. Traction: Traction represents your tyre’s efficiency on wet roads. For instance, tyres with the highest AA grade will stop more quickly on wet pavements than those with grade C.
2. Temperature: Tyres can resist heat. Again, the A-grade rubber has been optimized to resist heat, whereas C-grade tyres are less resistant.
3. Treadwear: It’s the amount of time you should expect for your tread life. Treadwear is represented by a number, and 100 is the minimum tread wear. Anything less, and you risk your safety. The higher the number, the longer it would last.

But choosing the most suitable tyre doesn't have to be difficult. There are several popular tyre dealers in Abu Dhabi who have a wide range of premium, affordable tyres for both cars and two-wheelers.

#2. The Appropriate Pressure for Each Compound

You'd be shocked at just how few vehicle owners are unaware of the importance of the right tyre pressure for each compound. The majority will simply hand over their vehicles to technicians to check for faults!

However, one cannot always rely on the "kick test" to know if tyre pressure is right. There's a reason why there are several tools to ensure that your tyre is inflated at the optimal level recommended by the manufacturer.

How to maintain proper try inflation:

• Each tyre manufacturer has its own inflation settings. Please check the proper inflation for your tyre before taking a call.
• Then, take the air pressure gauge. Notice whether the pressure matches the manufacturer's recommended pressure. If not, you'll need to fill some air. If you do not know the right pressure for the tyre, we recommend checking it on the official website of the tyre manufacturer.

#3. Ensure Your Tyres Are Aligned

Although tire alignment is not directly related to tyres; it does affect performance. It focuses on the suspension system of your vehicle and the angle at which the tyre touches the road.

How to check if your tyres are not aligned?

• Simply drive on an empty road and leave the steering wheel for a few seconds. If your car veers off in another direction, you have an alignment issue.
• Another thing to check for misalignment is the direction of your tread. If your tyres are not aligned, the treads will wear in the opposite direction.

Unfortunately, you can’t correct poorly aligned tyres without mechanical help. Get your nearest mechanic and ask them to correct the alignment.

#4. Check Your Tyres Treads

Treads are raised patterns on tyres meant to improve their grip on the roads. The tyres should have enough tread to grip the road, evacuate water, and maintain control.

This is because if the treads are low, the vehicle would take extra effort to drive safely and stop, thus reducing the performance.

Here’s how to check if you have enough tread left:

Method 1: Use Tread Depth Gauge

Get a tread-depth gauge and check your treads at several places as the manufacturer recommends. If the treads are below 1.6 mm, it is imperative to change the tyre.

Method 2: Use tread-wear indicators on the tyre

Most tyres have tread wear indicators at the base of the main grooves. If the tread surface matches the level of these indicators, it’s time to change the tyre.

#5. Rotate Tyres Occasionally

Front and back tyres do not wear out evenly. And hence, it is imperative to rotate them occasionally. The thumb rule is to rotate tyres every 5,000 miles unless otherwise advised by the manufacturer.

It is imperative to note that different tyre rotating patterns depend on your car tyre, i.e. four-wheel drive, all-wheel drive, or front-wheel drive.

Your car technicians will be able to advise you on personalized rotation patterns.

#6. Dust Caps Are Important

Have you ever noticed your dust caps or valve fiddling while filling the air? Yes?

But you never thought about it because you didn't know the damage it could cause? Well, it is high time you ensure that these caps are fitted perfectly.

Here’s why:

• These small caps prevent particles like grit, mud and water from sitting on the valve.
• When these things sit on the valve for an extended time, they can wear, corrode or even leak your tyres!
• Moreover, they act as secondary air pressure seals.
• And without these caps, your tyres would lose pressure over time without you even noticing it!

#7. Choosing Wide Tyres

Wider tyres should give a more extensive contact area, increasing traction on the road. This aids the motorist in maintaining better control, especially when the car travels at high speed.

Wider tyres significantly reduce stopping distances and provide superior control during braking. There will be minimal to no skidding. As a result, increasing safety.

Other Things That Can Make a Significant Difference in Your Performance

1. Make sure your vehicle is as light as possible:

   Increased strength ratios result from a compact vehicle. Removing extra cargo from the car may relieve pressure on the tyres and improve their performance. Specific load capacities for each tyre are included in its standards.

   Its effectiveness is enhanced by remaining within it and to prevent excessive tyre pressure, the extra weight must also be constant. V, W, and Y-rated tyres are suitable for high-performance cars like the Lamborghinis. By removing weight from the tyres, proper car maintenance helps you get the most efficiency out of them.

2. Get Polyurethane Bushing:

   Rubber bushings in the vehicle absorb shocks while driving on bumpy roads and keep the vehicle quiet. However, if your car is of an older model, the rubber bushing may not be as absorbent as new models.

   Hence, installing polyurethane bushings can make a significant difference. They are more agile and resistant to chemicals and tears. However, replacing them in mechanic shops is advisable, as it's necessary to burn the old bushings.

3. Invest in Premium Oil:

   Investing in premium motor oil is worth every penny! These oils differ in a way that they contain additives that lubricate the vehicle's engine. This helps improve longevity while improving mileage. The best thing about them is that even the most premium oils are pocket friendly.

Conclusion

Tyres have a significant impact on your vehicle’s performance. Use these little tips to boost your vehicle’s performance.

If you want premium tyres in Dubai, then Tyresvision is your one-stop destination. From Pirelli to Michelin, we’re a leading tyres dealer in Abu Dhabi with attractive car tyres offers.